Home Page › Forums › Discussion Topics – Ask the Experts › bumper bolts › Reply To: bumper bolts
October 2, 2017 at 6:44 pm
#13183
62cutlassconvert
Participant
Here’s some pictures of the bolt for the vertical over-rider. The bolt is a carriage bolt, 1/4″ course with the spacer shown. The bolt slips into the flat sided hole at the bottom of the over-rider, then the spacer goes on, then it contacts the lower valance at the boss and washer and the nut go on the back. Knew I had this somewhere and just found it. Uses a carriage bolt to keep it from turning since you can’t get to the head of the bolt. Should be able to find something that works at you local ACE.