Home Page › Forums › Discussion Topics – Ask the Experts › Sandy's 63 Jetfire 4 spd manual › Reply To: Sandy's 63 Jetfire 4 spd manual
The final step before preparing to paint the engine bay & front end was the final underneath clean. We set the car upon the hoist with a ‘giant diaper’ of tarps so we could keep the dirty water flowing out the door of the shop. Steve first sprayed it with degreaser then pressure washed. I manned the floor squeegee and Haz-Mat Man got real dirty! (had to hose him down after) We are amazed at the awesome rust free condition of this car. This photo was taken before I did a final hand washing. This is under the gas tank area. As you know the entire unibody was drenched or dunked in a red primer and there are many spots under the car where there are dried drops of paint.