Home Page › Forums › Discussion Topics – Ask the Experts › Sandy's 63 Jetfire 4 spd manual › Reply To: Sandy's 63 Jetfire 4 spd manual
We discovered a hole in the driver’s side fender where the horn was mounted rather poorly: vibration broke a chunk right out of the fender. Another Jetfire owner mentioned they had this trouble too. Relocation of the horns due to the TRF tank apparently was not thought out well. We used the chunk that broke out that was still attached to the horn to fix the hole.
[blockquote]BBCode you used is not allowed.[/blockquote]
Next, following another wipe down with pre-paint cleaner – we painted all the lower front frame section, the A arms, wheel wells etc.
[blockquote]BBCode you used is not allowed.[/blockquote]
A photo from below
[blockquote]BBCode you used is not allowed.[/blockquote]
Some of the final sanding and prep work. All the surface rust was removed and in some areas we sprayed with rust encapsulator, then whole bay was primed first then finish painted. The rad support and all of the other black areas were repainted too
[blockquote]BBCode you used is not allowed.[/blockquote]
[blockquote]BBCode you used is not allowed.[/blockquote]