Member: Jetfire1












Member: 62oldsf85












Member: JetfireGuy











XTR Prototype
(courtesy of General Motors)












Member: JimNoel











Member: JimNoel
Custom 1962 Jetfire Wagon

Home Blog Blog Driver side mirror hardware wanted

Driver side mirror hardware wanted

Home Page Forums Discussion Topics – Ask the Experts Driver side mirror hardware wanted

This topic contains 1 reply, has 2 voices, and was last updated by  JimNoel 4 months, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #12744

    jensenracing77
    Participant

    I just picked up the NOS mirror from ebay that was listed. It had no box and was missing the hardware. Does anyone have a good used gasket and mounting bracket? I am installing this one on the automatic car and will likely install that one on our 4 speed car. My 4 speed car does not have a mirror so I will need the mounting bracket and gasket. I would like a copy of the template also but I can measure the location of the one on the automatic car easy enough if I can’t get a template.

    I have the little set screw so don’t need it.

    #12749

    JimNoel
    Participant

    Hi Eric,
    I have the mirror placement template if you need it but no extra mounting hardware or gasket.
    Jim

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

New Posts in the Forum

Recently Active

Profile picture of jensenracing77
Profile picture of john-sage
Profile picture of TheOtherDave
Profile picture of Jim Noel
Profile picture of scott
Profile picture of joe_padavano
Profile picture of 62 Cutlass Convert
Profile picture of Greg Oakley
Profile picture of matt zischkau
Profile picture of Ken Dennison
Profile picture of Felix j garcia
Profile picture of perkinsrk1963
Profile picture of ray arnold
Profile picture of Clint
Profile picture of ron

Who’s Online

Profile picture of jensenracing77