Member: Jetfire1

Member: 62oldsf85

Member: JetfireGuy

XTR Prototype
(courtesy of General Motors)

Member: JimNoel

Member: JimNoel
Custom 1962 Jetfire Wagon

Home Blog Blog Part identification

Part identification

This topic contains 2 replies, has 2 voices, and was last updated by  jensenracing77 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #14180


    Has anyone seen these bolts on a 61-63 f-85, Cutlass or Jetfire? I got another box of NOS stuff in that was all 61-63 parts and these were in there with no package. I don’t think they belong to our cars but I have yet to have one all the way apart so I can’t be sure. He may have put them in the box by mistake or just did not know and tossed them in.



    Might be lower mount bolts for the Hydralic ram on converts. There is a U bracket welded to the floor with a captive nut on one side. The ram eye sits in the middle of the U and rides on the shoulder of the bolt. My best guess.



    I never thought about them possibly being convertible top bolts. I Have never worked on a convertible before to know. Can anyone confirm if that is correct? If that is what they are for I know I will not need them. Thanks,

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

New Posts in the Forum

No topics found

Recently Active

Profile picture of bartmo
Profile picture of oaklyss
Profile picture of jensenracing77
Profile picture of doctorg
Profile picture of ncuevas79
Profile picture of JimNoel
Profile picture of 62oldsf85cutlassmac
Profile picture of johnsage
Profile picture of kid442
Profile picture of joe_padavano
Profile picture of macf85
Profile picture of mikepoe59
Profile picture of deucephaeton
Profile picture of willcut
Profile picture of crj315

Who’s Online

There are no users currently online