Member: Jetfire1












Member: 62oldsf85












Member: JetfireGuy











XTR Prototype
(courtesy of General Motors)












Member: JimNoel











Member: JimNoel
Custom 1962 Jetfire Wagon

Home Blog Blog PCV/air cleaner/valve cover grommets

PCV/air cleaner/valve cover grommets

Home Page Forums Discussion Topics – Ask the Experts PCV/air cleaner/valve cover grommets

This topic contains 3 replies, has 3 voices, and was last updated by  rustynail 6 years, 4 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #7250

    rustynail
    Member

    Need help locating correct grommets for the Jetfire PCV for the air cleaner and valve cover. Where does the small hose go to from the PCV valve?

    #7256

    bkturbox
    Participant

    Small line goes to a similar size line connection on top of the throttle section of the carb.

    #7257

    JimNoel
    Participant

    I do not know where to find the valve cover PCV grommet. Have always reused what was there. Just lucky! The PCV vacuum source is on the front-top of the throttle body. Brass tap. See attached pic’s.
    Jim

    IMG_2577t

    IMG_2578t

    IMG_2581t

    Attachments:
    #7258

    rustynail
    Member

    Thanx, Jim, for the feedback. The pictures make it very clear where things go.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

New Posts in the Forum

Recently Active

Profile picture of joe_padavano
Profile picture of Ken Dennison
Profile picture of Greg Oakley
Profile picture of twobolts
Profile picture of vabalelag
Profile picture of jensenracing77
Profile picture of john-sage
Profile picture of joemo
Profile picture of ray arnold
Profile picture of Jim Noel
Profile picture of Clint
Profile picture of Brent
Profile picture of jafotel
Profile picture of scott
Profile picture of DeucePhaeton

Who’s Online

There are no users currently online