Steel Fuel Line and Oil Line needed

[BruceM]

Hi Everyone, I hope someone can help me on this. I am restoring a ’62 Jetfire and want to bring it to factory new condition. One obstacle has been that the previous owner had made modifications to the turbo system, so I don’t have all the parts. Missing/modified was the original steel fuel line from the fuel pump to the carburetor inlet and the original steel oil line from the oil pump to the turbo housing. Does anyone have extras of these that you could sell or lend to me? I don’t need to buy them because I would have them reproduced in stainless steel. I could borrow them and ship them back to you when I am finished. Or, I am willing to buy if it isn’t too expensive. They just need to be correct in size and fit. Please e-mail me at bruceandmichelle@q.com if you can help. Thanks.

Bruce Murdock

[62oldsf85]

Did you ever get these? I have a spare set now we could work with.
Scott

[BruceM]

Hi Scott,

Not yet. E-mail me your phone number so I can call you and work something out. Thanks for your help.

Bruce

[62oldsf85]

Bruce,
Couldn’t figure out how to access your email. Mine is sphillips16@msn.com Put Jetfire in the topic line so I’ll know what it’s for.

[perkinsrk]

Sorry for the confusion. If you want to email a site member, just note their UserName and go to “Membership”, “UserList”. Then, follow the instructions on the top of that page. This is a way you can email any site member without showing your contact information to everyone else.

[Author]

Posts