Reply To: 62 Cutlass front parking/turn light lens gasket

Home Page Forums Discussion Topics – Ask the Experts 62 Cutlass front parking/turn light lens gasket Reply To: 62 Cutlass front parking/turn light lens gasket

#13288
62cutlassconvert
Participant

Man, everything sticks to both the alum housing and the lens like crazy. Would never be able to get it apart and I only have one good lens to work with. Tried RTV and regular Permatex Silicon sealant and same result. Tested a small area using veggie oil and while it helped on the release it wasn’t reliable for release and if I have the whole perimeter gooped to form the gasket I would be very concerned about being able to separate them. You’re right on the silicon grease or spay silicon, complete adhesion. Also got a product called Versimold which is a partially cured form of rubber that is form-able to whatever shape you want and then cures with a heat gun or oven bake. Check it out, looks very useful, but had a difficult time with this application, didn’t work out but may give it another try.

Cutting a crude foam gasket for now but any suggestions appreciated for a better product.

Recent Articles

Turbo System Safety Checks

Turbo System Safety Checks

The safety components of the factory designed turbo system have some interactive groups of safety "c...(read article)

Engine Front Drive Pulleys

Engine Front Drive Pulleys

The standard drive pulley has one groove. It drives the water pump/fan and alternator or generator. ...(read article)

1961-1963 F85 Car and Option Prices

1961-1963 F85 Car and Option Prices

Attached to this article is PDF file containing an extensive list of car and option pricing for 1961...(read article)

OldsJetfire Forum