Reply To: Conversion to disc brakes

Home Page Forums Discussion Topics – Ask the Experts Conversion to disc brakes Reply To: Conversion to disc brakes

#17397
62cutlassconvert
Participant

BCCP doesn’t. He uses a different hub.

I dont know this for sure but i believe i remember the Tempest hub in front is a five lug? There is another one or two as well I believe. Couldn’t confirm which ones. Then you go for new axles in the rear I believe. BCCP can supply or Moser will make them. Not cheap.

Also, there are two hub styles, one that has the high and low areas and one that is all high(thick) areas. I guess that could be filled and redrilled. I was told by a machine ahop they do not recommend filling and drilling out the rear axle. I was told the process weakens the flange, better to get new axles which are easily available.

Recent Articles

Turbo System Safety Checks

Turbo System Safety Checks

The safety components of the factory designed turbo system have some interactive groups of safety "c...(read article)

Engine Front Drive Pulleys

Engine Front Drive Pulleys

The standard drive pulley has one groove. It drives the water pump/fan and alternator or generator. ...(read article)

1961-1963 F85 Car and Option Prices

1961-1963 F85 Car and Option Prices

Attached to this article is PDF file containing an extensive list of car and option pricing for 1961...(read article)

Recently Active Members

Profile picture of perkinsrk1963
Profile picture of joe_padavano
Profile picture of jensenracing77
Profile picture of ulrickaka
Profile picture of mikeb

OldsJetfire Forum