Reply To: Restoration of our 62 4 speed Jetfire

Home Page Forums Discussion Topics – Ask the Experts Restoration of our 62 4 speed Jetfire Reply To: Restoration of our 62 4 speed Jetfire

#16039
jensenracing77
Participant

I was mistaken, They used the high heat tape for the wire harness where it runs behind the heater box to the engine. Along the valve cover under the turbo is regular wire harness tape. Not really sure why they decided to not use the high heat tape near the turbo. That part of the harness tape was hard as a rock.

I got all the main harness re-taped for under the hood. I am not re-taping anything inside the car.

I had to order some new terminals for the headlight sockets. I thought I had taken all of them apart before but found that I missed the driver side headlight and parking light socket. These terminals were really bad.

Recent Articles

Turbo System Safety Checks

Turbo System Safety Checks

The safety components of the factory designed turbo system have some interactive groups of safety "c...(read article)

Engine Front Drive Pulleys

Engine Front Drive Pulleys

The standard drive pulley has one groove. It drives the water pump/fan and alternator or generator. ...(read article)

1961-1963 F85 Car and Option Prices

1961-1963 F85 Car and Option Prices

Attached to this article is PDF file containing an extensive list of car and option pricing for 1961...(read article)

Recently Active Members

Profile picture of graytoad
Profile picture of johnsage
Profile picture of joe_padavano
Profile picture of jensenracing77
Profile picture of carl

OldsJetfire Forum