Member: Jetfire1

Member: 62oldsf85

Member: JetfireGuy

XTR Prototype
(courtesy of General Motors)

Member: JimNoel

Member: JimNoel
Custom 1962 Jetfire Wagon

Home Blog Blog upper radiator support

upper radiator support

Home Page Forums Discussion Topics – Ask the Experts upper radiator support

This topic contains 6 replies, has 2 voices, and was last updated by  captiannapalm 1 year, 1 month ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
  • #13067


    anyone know of an extra upper radiator support laying around for a 62? I have looked all over.



    I don’t have any but do you need one for the cross flow or the down flow or does it matter for your project?



    I am looking for the one that goes over the top of the radiator.



    The one for a cross flow does not have a hole for the radiator cap and the one for the down flow has a hole where the cap is located. I believe (but not 100% sure) the one with the hole will also work for the cross flow but would not be “correct”



    I found what I hope will work, but it sits too tight on the top. also did these have a shroud?



    No shroud in the 61-63 f-85 models. I did see a car that had a very nice looking home made one. I did not have a camera or I would have taken a picture of it.



    Dammit. The guy who sold it to me said that these had one…

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.

New Posts in the Forum

Recently Active

Profile picture of oaklyss
Profile picture of barry
Profile picture of deucephaeton
Profile picture of jensenracing77
Profile picture of kid442
Profile picture of johnsage
Profile picture of ncuevas79
Profile picture of doctorg
Profile picture of joe_padavano
Profile picture of BruceM
Profile picture of mikepoe59
Profile picture of jcassel250
Profile picture of JimNoel
Profile picture of bartmo
Profile picture of captiannapalm

Who’s Online

There are no users currently online