good to know

find one in a junkyard

I unwound the tube from the one i got at the junkyard. They didnt charge me for it. The nice thing was the motor was out of the car. what does that tube do?

how hard is this to replace

thank you

I’d still be looking at a rebuild

[blockquote]BBCode you used is not allowed.[/blockquote]

16×7 205/55r16

[blockquote]BBCode you used is not allowed.[/blockquote]

16×7 205/55r16

Is this ok to drive. I was going to take it to a show this weekend. Any risk of over heating?

this is taken from tire tech

Note: The overall diameter of a steel belted radial is determined by the steel belts, there is little, if any, change to the overall diameter of the tire due to differences in rim width.

The industry rule of thumb is that for every 1/2″ change in rim width, the tire’s section width will correspondingly change by…[Read more]

Any website has that info

My rims are 7″ inches wide whereas yours are 6″wide. The 8.43 section width is based on a 6.5 inch rim.For every 1/2 inch you add 2/10ths.That makes my section width 8.63.Anyone have issues with the inner part of the rim rubbing on the suspension?

on the top of the intake

Well that explains why yours fit no problem. I installed 16×7

I have a set of 4 that are NIB that I didn’t need

What is 12SI and 130CS

that needs translation

Then the vendor shipped the wrong ones. I fixed the issue though.. Wifes hair dryet and a bfh… Joe what size rims do you have