vacuum line on exhaust manifold

[62 Cutlass Convert]

Sorry, I was addressing the captain with the no vacuum produced by exhaust manifold in that overall comment.

[scott]

[blockquote]BBCode you used is not allowed.[/blockquote]

Lets see if this works…..

[scott]

[blockquote]BBCode you used is not allowed.[/blockquote]

[blockquote]BBCode you used is not allowed.[/blockquote]

Ok this isnt working but let me know if it did…

Attachments:

You must be logged in to access attached files.

[joe_padavano]

I’m not sure what you’re trying to show in those photos. If they were in focus it might help. I do see a copper line in the second photo. That’s not factory. Olds NEVER used copper lines, only steel.

[scott]

That is the tube in question. it is not the choke tube. that is the tube that goes into the pass. side exhaust manifold. the pink ribbon was used to highlight it.

[joe_padavano]

And where does the other end go? Again, NOT factory, so you’ll have to ask whoever installed it why it is there.

[scott]

Again it runs fro the back of the FACTORY ex. man…..

[62 Cutlass Convert]

The picture is too close in to get a full idea of what’s going on. Pull back and get a good focus please.

Maybe get a pic of how it is connected to the exhaust manifold too.

Can’t really tell but is the copper tube just hanging in the air up there and not connected?

[scott]

Kind of hard up underneath, but yes that tube jst sits there now.And yes it does have vacuum.

[62 Cutlass Convert]

You’re saying it’s sucking not pushing air right?

[Author]

Posts