this is taken from tire tech

Note: The overall diameter of a steel belted radial is determined by the steel belts, there is little, if any, change to the overall diameter of the tire due to differences in rim width.

The industry rule of thumb is that for every 1/2″ change in rim width, the tire’s section width will correspondingly change by…[Read more]

Any website has that info

My rims are 7″ inches wide whereas yours are 6″wide. The 8.43 section width is based on a 6.5 inch rim.For every 1/2 inch you add 2/10ths.That makes my section width 8.63.Anyone have issues with the inner part of the rim rubbing on the suspension?

on the top of the intake

Well that explains why yours fit no problem. I installed 16×7

I have a set of 4 that are NIB that I didn’t need

What is 12SI and 130CS

that needs translation

Then the vendor shipped the wrong ones. I fixed the issue though.. Wifes hair dryet and a bfh… Joe what size rims do you have

well i have issues.just put on the 205s and i am rubbing on the passenger side and maybe 1/2 inch on driver side.

zero offset. the 225/50zr16 are 8.9 section width and they hit the rear rip on the fender. so if you are saying that 215s fit, then the 205s I have coming should fit too.

what is JWO?

how hard is it to pull the rear axle?

According to the shop, they just dropped right in. They didn’t fit snug.