brake wheel cylinders

This topic has 6 replies, 6 voices, and was last updated 7 years, 7 months ago by Jim Noel.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
July 22, 2018 at 11:28 am #13868

Bart Morgan
Participant

I am having no luck finding wheel cylinders for 62 cutlass. Is there a cross reference for substitute?

July 22, 2018 at 11:33 am #13869

Greg Oakley
Participant

No, just get them re-sleeved by a brake restore company. Lots of them on the net.

July 22, 2018 at 12:36 pm #13870

jensenracing77
Participant

If they are not pitted then just rebuild them. If only pitted in the very center and not where the cup goes you would also likely be ok to rebuild.

July 22, 2018 at 3:10 pm #13872

scott
Participant

I have a set of 4 that are NIB that I didn’t need

July 27, 2018 at 12:23 pm #13894

Bart Morgan
Participant

Yes. I want them.
email me at n248b@yahoo.com
Bart

July 28, 2018 at 8:57 am #13898

joe_padavano
Participant

Kanter also sells new (Chinesium) wheel cylinders for $44 each or $146/set of four.

July 28, 2018 at 5:41 pm #13899

Jim Noel
Participant

New rears are available on eBay. Company in Duluth MN sells them. I have bought two sets of rears and they fit and work fine. $45.50 per set. https://www.ebay.com/itm/Both-rear-wheel-cylinders-for-Oldsmobile-1942-to-1966-for-your-brake-job-save/302821835575?fits=Year%3A1962%7CMake%3AOldsmobile%7CModel%3ACutlass&hash=item4681968337%3Ag%3AxqwAAOSwR9pbHoGi&_sacat=0&_nkw=brake+wheel+cylinder+1962+Oldsmobile+Cutlass&_from=R40&rt=nc&_trksid=p2380057.m570.l1312.R1.TR0.TRC2.A0.H0.TRS5#vi-ilComp

Attachments:
You must be logged in to access attached files.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.

Attachments: