so what TC did you use on the TH200C?

So was the stock size replacement of 180/85/13 …these are 25″

i have 205/55zr16 bfgs on 7″ rims……sit perfect height wise……width….had to use wifes hair dryer and bfh for the lip on the rear quarters..

Reading his post is making me rethink….Go with th200c

D&D recommended the 700r4 from a v-60 degree bh…minimum if any fab…..

how did this turn out? Any major clearance issues

I have a finger width on my driver side. Had to use wifes hair dryer and a 42oz dead blow to massage the lip on the passsneger side. I am running 205-55-zr16 on a 7″rim

Thats not it. This is a clip that is in the diaphram area. I will supply a pic later. I just want to make sure that ir does not hinder the operation. Thank goodness for NOS..

So after the post office lost my first one the second one just arrived. There are some differences. In particular there is a piece that looks like it was there for shipping purposes back in the day. Looks like a little clip. Thought?

good to know

find one in a junkyard

I unwound the tube from the one i got at the junkyard. They didnt charge me for it. The nice thing was the motor was out of the car. what does that tube do?

how hard is this to replace

thank you

I’d still be looking at a rebuild

[blockquote]BBCode you used is not allowed.[/blockquote]

16×7 205/55r16

[blockquote]BBCode you used is not allowed.[/blockquote]

16×7 205/55r16

Is this ok to drive. I was going to take it to a show this weekend. Any risk of over heating?